Omron J7 series, User Manual

Page: 149 / 177

135
Specifications of Accessories
Chapter 9-2
9-2 Specifications of Accessories
9-2-1 List of Accessories
Mounting Accessories
Dedicated Accessories
Recommendable Separate Accessories
Name Model Description
Adapter Panel
(for J7AZ Series) SI232J/J7 & SI232J/J7C Interface required to connect a Digital Operator to a
J7AZ Inverter. There are two types of Adapter Panels
available: a fixed type (SI232J/J7) and a detach-able
type (SI232J/J7C). Use the detachable type for copying
parameters.
RS-422/485 Communications
Unit SI485/J7 Interface required to perform RS-422/485 general-
purpose communications. The communications protocol
conforms to MODBUS (same protocol as V7AZ and F7Z
Inverters).
Fan Unit FAN00106
_
Replacement for the existing cooling fan of the Inverter.
Replace the cooling fan if it has reached the end of its
service life or a warning of cooling fan failure (FAN) is
indicated.
Name Model Description
Digital Operator (with adjuster) JVOP-140 Operator used to perform operations for J7AZ and V7AZ
Inverters. It is identical to the Digital Operator attached
to standard V7AZ Inverters, and has a built-in EEPROM
in which the Inverter’s parameter settings can be stored.
If the Digital Operator Case (3G3IV-PEZZ08386A) is
used, the Inverter can be mounted in a control panel, or
operated by remote control.
Digital Operator
(without adjuster) JVOP-146 Operator used to perform operations for J7AZ and V7AZ
Inverters by remote control. It has a built-in EEPROM in
which the Inverter’s parameter settings can be stored.
Digital Operator Case
(for 3G3IV-PJVOP140) 3G3IV-PEZZ08386A Case for JVOP-140 Digital Operator. Mounting a JVOP-
140 in the Case allows the Inverter to mounted in a
control panel, or operated by remote control.
Digital Operator Connection
Cable 3G3IV-PCN126/326 Required when using a Digital Operator with J7AZ
Inverters. Cable length: 1 m, 3 m.
DIN Track Mounting
Bracket 3G3IV-PEZZ08122 _ An adapter making it possible to easily mount the
Inverter to DIN tracks.
Name Model Description
EMC-conforming Input Noise
Filter 3G3JV-PFI
_
A Noise Filter on the input side meeting the EC Directive’s
EMC requirements. The top of the Noise Filter has
mounting screw holes with which the Inverter mounted to
the Noise Filter can be secured.