Omron F3SJ Series, Original Instructions Manual

Page: 47 / 224

27
F3SJ-A
User’s Manual
Chapter
2
Ba
si
c Sys
te
m
System Configuration and Functions
E
Basic System
Basic system indicates the F3SJ with its default factory settings.
The basic system provides basic safety light curtain functions. Most functions can be used without performing
additional configuration.

Wiring Diagrams
 Wiring using manual reset mode, external device monitoring function
K1
K2
S1 S2
* 1 * 1
* 2
K1 K2
K3
+24 V D C
0V
* 2
K4
Interlock selection input (White)
S1
S2
K1, K2
K3, K4
: External test switch (connect to 24V if a switch is not required)
: Interlock/lockout reset switch
: Relay or other device that controls hazardous parts of the machine
: Load or PLC, etc. (for monitoring)
Emitter
Receiver
(Grey) Communication line (+)
(Pink)
Communication line (-)
0V(Blue) 0V(Blue)
Power
supply
Shield
Shield
Reset input(Yellow)
24V(Brown)
24V(Brown)
External device monitoring input
(Red)
Auxiliary output 1(Yellow)
Safety output 2(White)
Auxiliary output 2(Red)
Test input(Black)
Safety output 1(Black)
*3 *3
*1 Use a switch for micro loads (Input specifications: 5V, 1mA)
*2 F3SJ can operate even if K3 and K4 are not connected
*3 Green for the single-ended cable F39-JC
A