![background image](http://html1.mh-extra.com/html/omron/e3nw-ect/e3nw-ect_operation-manual_741099065.webp)
6 - 3
6 Hardware Specifications of E3NW-ECT
E3NW-ECT EtherCAT Digital Sensor Communication Unit Operation Manual (E429)
6-2 General S
p
ec
ification
s
6
6-2
General Specifications
This section explains the general specifications of the E3NW-ECT EtherCAT Slave Unit.
*1 The temperature is limited by the number of Amplifiers that are connected.
For 1 to 2 Amplifiers: 0 to 55
°
C; 3 to 10 Amplifiers: 0 to 50
°
C; 11 to 16 Amplifiers: 0 to 45
°
C; 17 to 30 Amplifiers:
0 to 40
°
C.
*2 When using the OMRON CJ-series and CJ1W-NC
82, up to 4 sensor communication units can be connected
per CJ1W-NC
82 unit.
Item
Specification
Unit power supply voltage
24 VDC (20.4 to 26.4 VDC)
Power and current
consumption
2.4 W max. (Not including the power supplied to Sensors.), 100 mA max. (Not
including current supplied to Sensors.)
Noise immunity
Conforms to IEC 61000-4-4, 1 k (power line).
Vibration resistance
10 to 60 Hz with an amplitude of 0.7 mm, 60 to 150 Hz, 50 m/s
2
, 1.5 hours each in
X, Y, and Z directions
Shock resistance
150 m/s
2
with amplitude of 0.7 mm
(3 times each in 6 directions on 3 axes)
Dielectric strength
500 VAC, 50 and 60 Hz, 1 min
Insulation resistance
20 M
Ω
or more (at 500 VDC)
Ambient operating
temperature
0 to 55
°
C
*1
Ambient operating
humidity
25% to 85% (with no condensation or icing)
Ambient operating
atmosphere
No corrosive gases
Storage temperature
−
30 to 70
°
C (with no condensation or icing)
Storage humidity
25% to 85% (with no condensation or icing)
Installation method
35-mm DIN track mounting
Number of connected
units limitation
*2
Summary of Contents for E3NW-ECT
