SECTION 3
Co
nnec
tion
s
and Wirin
g
SECTION 3
CJ-series ID Sensor Units
57
RFID System
User's Manual
Connections and Wiring
Connecting the Antenna
Connection Method
1.
Holding the base of the connector, align the
white mark on the Unit with the white mark on
the connector and insert the connector.
2.
Press in on the connector until it locks in
place.
The connector will not lock into place if you hold onto the ring. Always hold onto the base of the connector.
The antenna that can be connected with the connector for Amplifier/Antenna is only V680-H01.
Removal Method
1.
Hold onto the ring and pull straight out.
The connector cannot be removed if you hold onto the base of the connector. Never pull on the cable with excessive
force. The connectors may be broken or damaged.
Connecting or disconnecting the connector with power to the Unit turned ON may cause the Unit to be damaged or
malfunction.
Base of connector
Ring
Base of connector
Ring
Summary of Contents for CJ1W-V680C11
Page 213: ......
