58
System Settings and Auto Wait Time Setting
Section 5-3
5-3-2
Auto Wait Time Setting
If a normal response is not received in communications with a Data Carrier
when the Data Carrier has been detected, retry processing will be performed
to resend the same command. Retry processing is performed until the Auto
Wait Time has expired while the ID Sensor Unit is waiting for a Data Carrier.
The Data Carrier wait status begins for a single auto specification, when com-
mand execution is started. From the second Data Carrier for a repeat auto
specification, it begins when communications with the previous Data Carrier
have been completed.
Note
1.
First word allocated to Unit in DM Area: m = 100
×
unit No.
2.
Always turn the power supply to the PLC OFF and ON or turn ON the Spe-
cial I/O Unit Restart Bit after changing settings in the DM Area from a Pro-
gramming Device. DM Area setting data is transferred to Special I/O Units
only when the power supply is turned ON or the Special I/O Unit Restart
Bit is turned ON.
DM Area address
Bit No.
Description
Default
Head 1 of
CS1W-
V600C11,
CS1W-
V600C12,
CJ1W-
V600C11,
or CJ1W-
V600C12
Head 2 of
CS1W-
V600C12
or CJ1W-
V600C12
m + 1
m + 101
00 to
15
0000 to
9999
1 to 9999
×
0.1 s
0: Infinite (Time not
monitored)
0
(Infinite)
Results
Comm. A
Normal End Flag
Error End Flag
Communications with
Data Carrier
Data Carrier movement
Data Carrier A
Waiting for Data Carrier
Waiting for Data Carrier,
Auto Wait Time exceeded.
Command Execution Bit
ID Busy Flag
Data Carrier B (missing)
Data Carrier
Missing Error
Results
Summary of Contents for CJ - 12-2004
