![background image](http://html1.mh-extra.com/html/omron/cj-12-2004/cj-12-2004_manual_740789039.webp)
20
Connections and Wiring
Section 2-4
2-4-2
Wiring the External Power Supply (CS1W-V600C12 Only)
Wiring the power supply as shown below.
M3 self-lifting screws are used as the connection terminals for the power sup-
ply. When necessary, use the following crimp terminals. The tightening torque
is approximately 0.59 N·m.
Examples of Applicable Crimp Connectors
Recommended DC Power Supplies (Miniature, by OMRON)
Note
1.
Although adequate measures have been taken inside the I/O Sensor Unit
for noise entering on the power supply line, supplying power through a line
filter can be used to greatly attenuate ground noise.
2.
Although the rated power consumption of the CS1W-V600C12 is 360 mA
at 24 V DC, be sure to consider the surge current when determining ca-
pacities.
+24 V DC
0 V
Line filter
CS1W-V600C12
Connection Example
Manufacturer
Model number
Applicable wire size
Shape
J.S.T Mfg. Co., Ltd. 1.25-N3A
AWG24 to 16
Forked
J.S.T Mfg. Co., Ltd. 1.25-Y3A
(For M3 terminal)
6.5 mm max.
Model number
Output capacity
Input voltage
S82K-03024
24 V DC, 1.3 A
100/200 V AC
S82J-0224
24 V DC, 1.1 A
100 V AC
Summary of Contents for CJ - 12-2004
