40
Outline of Data Exchange
Section 4-1
4-1-2
Special I/O Unit Restart Bits
Unit operation can be restarted after DM Area settings have been changed or
after an error has been corrected by turning the power supply to the PLC OFF
and ON or by turning ON the Special I/O Unit Restart Bit.
CS-series Special I/O Unit Restart Bits
CJ-series Special I/O Unit Restart Bits
Exchanged data will be all zeros while the Unit is being restarted.
Note
Replace the ID Sensor Unit if an error cannot be cleared even after turning
the power supply OFF and ON or after turning ON the Special I/O Unit Restart
Bit.
Bit address
Function
A50200
Unit 0 Restart Bit
The Unit will be restarted
when the corresponding bit is
turned ON.
A50201
Unit 1 Restart Bit
.
.
.
.
.
.
A50215
Unit 15 Restart Bit
A50300
Unit 16 Restart Bit
.
.
.
.
.
.
A50715
Unit 95 Restart Bit
Bit address
Function
A50200
Unit 0 Restart Bit
The Unit will be restarted
when the corresponding bit is
turned ON.
A50201
Unit 1 Restart Bit
.
.
.
.
.
.
A50215
Unit 15 Restart Bit
A50300
Unit 16 Restart Bit
.
.
.
.
.
.
A50715
Unit 95 Restart Bit
Summary of Contents for CJ - 12-2004
