![background image](http://html1.mh-extra.com/html/omron/cj-12-2004/cj-12-2004_manual_740789038.webp)
19
Connections and Wiring
Section 2-4
2-4
Connections and Wiring
2-4-1
Connecting R/W Heads
Connection Method
1,2,3...
1.
Holding the rubber molding on the connector, align the connector with the
key groove and press in.
2.
Press in on the connector until it locks in place.
Note
The connector will not lock into place if you hold onto the ring. Always hold
onto the rubber molding.
Removal Method
Hold onto the ring and pull straight out.
Note
The connector cannot be removed if you hold onto the rubber molding. Never
pull on the cable with excessive force. The conductors may be broken or dam-
aged.
Rubber molding
Ring
Rubber molding
Ring
Summary of Contents for CJ - 12-2004
