![background image](http://html1.mh-extra.com/html/omron/cj-12-2004/cj-12-2004_manual_740789120.webp)
101
Restarting Special I/O Units
Section 7-4
7-4
Restarting Special I/O Units
To restart operation after changing settings in the DM Area or after removing
the cause of an error, either turn the PLC’s power supply OFF and ON or turn
ON the Special I/O Unit Restart Bit.
CS-series Special I/O Unit Restart Bits
CJ-series Special I/O Unit Restart Bits
Note
If an error persists even though the power supply is turned OFF and ON or the
Special I/O Unit Restart Bit is turned ON, replace the ID Sensor Unit, Power
Supply Unit, or CPU Unit.
Bit address
Function
A50200
Unit 0 Restart Bit
The Unit will be restarted
when the corresponding bit is
turned ON.
A50201
Unit 1 Restart Bit
..
.
..
.
A50215
Unit 15 Restart Bit
A50300
Unit 16 Restart Bit
..
.
..
.
A50715
Unit 95 Restart Bit
Bit address
Function
A50200
Unit 0 Restart Bit
The Unit will be restarted
when the corresponding bit is
turned ON.
A50201
Unit 1 Restart Bit
..
.
..
.
A50215
Unit 15 Restart Bit
A50300
Unit 16 Restart Bit
..
.
..
.
A50715
Unit 95 Restart Bit
Summary of Contents for CJ - 12-2004
