![background image](http://html1.mh-extra.com/html/omron/cj-12-2004/cj-12-2004_manual_740789129.webp)
110
Sample Programming
Appendix B
Timing Chart (n = CIO 2000 + (10
×
0) = CIO 2000)
Note
1.
If communications with the Data Carrier fail or an error occurs, communications will be aborted at that
point, the error flags in the Results Information (word (n + 8)) will turn ON accordingly, and the error
code will be placed in the Processing Results Monitor (word (n + 9)). The previous read data will not
be changed.
2.
If the Abort Bit is turned ON while waiting for a Data Carrier, communications will be aborted at that
point. The Results Information (word (n + 8)) will always be 0000 (hex) in this case.
3.
To confirm the execution results from the user program, use the ON status of the Normal End Flag or
Error End Flag in the Unit Status.
4.
Do not turn ON the Command Execution Bit during command execution (i.e., while the ID Busy Flag
is ON). It will be ignored.
Command Execution Bit
Word n, bit 00
Command
Words (n+1) to (n+4)
Normal End/Error End
Word (n+7), bits 01/02
ID Busy
Word (n+7), bit 00
Resulting Information
Word (n+8)
Data storage area
1 scan
Read
Normal end
Read data
0000
Communications
processing
Abort Bit
Word n, bit 02
Read
0000
Waiting for
Data Carrier
Summary of Contents for CJ - 12-2004
