3-8
Section
Editing MULTIPLE I/O TERMINAL Unit Parameters and Monitoring Status
78
The specified MULTIPLE I/O TERMINAL Unit parameters and I/O Unit parame-
ters can be compared with the parameters in the device or file.
All the DRT1-COM Communications Unit parameters and all the parameters for
the I/O Units connected to the the DRT1-COM will be verified at one time.
To verify the parameters, click on “Compare with Device” or “Compare with File”
in the Edit Device Parameters window for the DRT1-COM Communications
Unit.
If a verification error occurs, the following screen will be displayed.
After the parameters have been written to the DRT1-COM, the device must
always be reset to make the new settings valid. Click on “Reset” in the Edit
Device Parameters window for the DRT1-COM to reset the device.
Printing MULTIPLE I/O TERMINAL Unit Parameters
If the information to be printed includes the DRT1-COM Communications Unit of
MULTIPLE I/O TERMINAL, the parameters for the I/O Units connected to the
DRT1-COM will be printed as well as the DRT1-COM parameters. Refer to 3-15
Printing Device Parameters for details.
Verifying MULTIPLE I/O
TERMINAL Unit
Parameters
Making the Parameters
Written to the Device
Valid
