3-15
Section
Printing Device Parameters
93
4. The “Range of Printed Device” setting specifies whether to print the parame-
ters of all devices or just the selected devices.
All Devices:
The Configurator will print the parameters of all devices.
Selected Devices Only:
The Configurator will print the parameters of the selected devices only.
5. The “Parameters to be Printed” setting specifies whether to print the Master
parameters, Slave parameters, or both. The parameters will be printed if
there is a check mark (
n
).
Master Parameters:
The Configurator will print the device parameters of Masters.
Slave Parameters:
The Configurator will print the device parameters of Slaves.
6. If necessary, click on “Set Printer” to change the printer settings. The printer
settings depend on the printer being used.
7. Click on “OK” to print the parameters.