2-3
Section
PCMCIA Card Installation
29
The following window will be displayed if the file cannot be found. In this
case, specify in the “Copy files from” box the drive in which the floppy disk
was inserted in step 1, then click on “OK.”
5. After the driver has been installed, remove the floppy disk and restart Win-
dows 95.
Verifying Driver Resources
1, 2, 3...
1. After Windows 95 is restarted, check that the driver has been installed cor-
rectly, as follows:
Click on the “Start” button, select “Control Panel” from the “Settings” menu,
double-click on the “System” icon in the Control Panel window, and select
the “Device Manager” tab from the top of the System Properties window
(refer to page 19). Check that “SST Devices” has been added, then click on
“+” to the left of “SST Devices” to check that “x” or “!” is not displayed at
PCMCIA Card driver “5136-DN-PCM(n)” where “n” is the PCMCIA slot num-
ber.