2-2
Section
ISA Board Installation
16
6. When “Input/output (/O)” is selected from the View Resources display, the
current I/O port allocations will be displayed.
Find 8 unused I/O port addresses that can be used for the ISA Board.
7. Select “Reserve Resources” at the top of the window.
8. After selecting “Input/output (/O)” from the Reserve Resources window,
click on “Add,” and register the range of I/O port addresses for the ISA Board
as shown in the following diagram.
In this example, I/O port addresses 250 through 257 (hexadecimal) are
reserved.
9. Follow the same procedure in steps 5 to 8 to reserve 16-KB of memory.
10. Click on the “OK” button at the bottom of the Computer Properties window to
accept the changes and close the window. A pop-up window will appear;
restart the computer as required.