2-3
Section
PCMCIA Card Installation
30
2. Verify the resources currently being used, as follows:
Double-click on “5136-DN-PCM(n)” to display the 5136-DN-PCM(n) Prop-
erties window and select the “Resources” tab from the top of the window.
The automatically set “Input/Output Range” and “Memory Range” values
will be displayed.
This completes installation of the PCMCIA Card driver. Write down the val-
ues of “Input/Output Range” and “Memory Range” because these are
needed later when installing the CompoBus/D Configurator.
