2-4
Section
CompoBus/D Configurator Installation
41
Installation Procedure
1, 2, 3...
1. Exit all other Windows programs.
2. Insert CompoBus/D Configurator disk 1 into the floppy disk drive.
3. For Windows 95/98 and Windows NT 4.0, click on the “Start” icon and select
“Run Program.”
For Windows NT 3.51, select “Run” from the “File” menu.
4. Specify “A:\setup.exe” for the command line and click on “OK.”
(It is also possible to click on “Browse” and select the setup.exe file from the
A: drive.)
5. The CompoBus/D Configurator’s setup program will start. A popup window
will indicate the progress of the setup as the program is loaded.
6. The following window will be displayed when the setup program has been
loaded. Click on “Next” after reading the precautions.
