Olivetti d-Copia 1600, Service Manual

Page: 104 / 242

2HA/2HB
1-4-8
(7)
A paper jam in the
paper feed section is
indicated during
copying (misfeed in
vertical paper con-
veying 1).
Jam code 15 Broken registration switch
actuator. Check visually and replace registration switch if its actuator is bro-
ken.
Defective registration
switch. Run maintenance item U031 and turn registration switch on and
off manually. Replace registration switch if indication of switch is
not light.
Broken drawer feed switch
1 or 2 actuator. Check visually and replace drawer feed switch 1 or 2 if its actuator
is broken.
Defective drawer feed
switch 1 or 2. Run maintenance item U031 and turn each switch on and off
manually. Replace the corresponding switch if indication of switch
is not light.
Check if the paper feed
clutch malfunctions. Run maintenance item U032 and select the paper feed clutch to
be turned on and off. Check the status and remedy if necessary.
Electrical problem with the
paper feed clutch. Check (see page 1-4-26).
Check if the drawer paper
feed clutch 1, 2 or 3 mal-
functions. Run maintenance item U032 and select the each clutch to be
turned on and off. Check the status and remedy if necessary.
Electrical problem with the
drawer paper feed clutch 1,
2 or 3. Check.
(8)
A paper jam in the
paper feed section is
indicated during
copying (misfeed in
vertical paper con-
veying 2).
Jam code 16 Broken drawer feed switch
1 or 2 actuator. Check visually and replace drawer feed switch 1 or 2 if its actuator
is broken.
Defective drawer feed
switch 1 or 2. Run maintenance item U031 and turn each switch on and off
manually. Replace the corresponding switch if indication of switch
is not light.
Check if the drawer paper
feed clutch 1 or 2 malfunc-
tions. Run maintenance item U032 and select the each clutch to be
turned on and off. Check the status and remedy if necessary.
Electrical problem with the
drawer paper feed clutch 1
or 2. Check.
(9)
A paper jam in the
paper conveying sec-
tion is indicated dur-
ing copying (multiple
sheets in the MP
tray).
Jam code 20 Deformed guides along the
paper conveying path. Repair or replace if necessary.
Broken registration switch
actuator. Check visually and replace registration switch if its actuator is bro-
ken.
Defective registration
switch. Run maintenance item U031 and turn registration switch on and
off manually. Replace registration switch if indication of switch is
not light.
Check if the MP paper feed
clutch malfunctions. Run maintenance item U032 and select the MP paper feed clutch
to be turned on and off. Check the status and remedy if neces-
sary.
Electrical problem with the
MP paper feed clutch. Check (see page 1-4-26).
Check if the right and left
registration rollers contact
each other. Check visually and remedy if necessary.
Problem Causes/check procedures Corrective measures