Olimpus FLUOVIEW FV500 User Manual Download Page 419

Page: 419 / 470

Appendix I Change of Default Folder for [File I/O] Panel

I-5

Page

Click the <OK> button to close the [System Properties] dialog box.

Now, the default folder for the [File I/O] panel will be changed from the next time

you start FLUOVIEW.

When the default folder is changed to C: IMAGES

To reset the default folder to the factory setup, enter “C: FLUOVIEW

IMAGES” in the [Value] text box.

Do not change the setup after “FLUOVIEWIMAGES” in the [User

Variables for <username>] list box. If erroneous setting is made here,

the system will be unable to be started up.

New default folder C

IMAGES is being

open.

TIP

NOTE

Summary of Contents for FLUOVIEW FV500























































































































































































































































































































































































































































































Search results

Summary of Contents for FLUOVIEW FV500

Reviews:

Olimpus FLUOVIEW FV500, User Manual, Page: 419 / 470

Search results

Summary of Contents for FLUOVIEW FV500

Reviews: