APPLIED OPERATIONS
/Image Acquisition
2-74
Page
Fig. 2-25 [Lasers] Sub-panel
7. Among the laser <Off> buttons on the right of the [Laser Intensity] scales in the
[Lasers] group box, click the <Off> button of the laser you want to use in transmitted
observation. This should change the <Off> button to the <Rdy> button (displayed in
the pressed-in condition).
8.
Click the <OK> button in the [FLUOVIEW] dialog box.
Image acquisition starts.
9. Adjust the brightness with the [PMT], [Offset] and [Gain] LED sliders in the [Ch]
group box in the [Acquire] panel. See section 2-2-1-4-9, “Adjusting the Image
Brightness” for details.
10. After acquiring images, select <Normal> from the list displayed below the [Surface
XY-Norm] option button in the [Scan Mode] group box to set the scanning range to
the original setting.
<Off> button
Select the laser type.
Summary of Contents for FLUOVIEW FV500
