manualshive.com logo in svg

Olimpus FLUOVIEW FV500, User Manual, Page: 204 / 470

Share
Download
Olimpus FLUOVIEW FV500 User Manual Download Page 204

APPLIED OPERATIONS

/Image Acquisition

2-94

Page

4 Selecting REX Mask File and Setting the Laser ON/OFF

Set the REX mask file in the REX mode and Bleach mode, and the laser ON/OFF

respectively.

1.  Select the [REX mode] option button in the [AOTF] group box in the [Lasers] sub-

panel.

2.  A frame to specify the REX mask file appears on the right side of the [REX mode]

option button. Right-click the mouse inside the frame to display the pop-up menu as

shown below.

Select the image to be masked in the menu.

In order to use the already saved file as a REX mask file, open the image

beforehand.

The opening method of the REX mask file is completely the same as that of

an image. For details, see section 2-3-2, “Opening Previously Saved

Images” in this manual.

3. 

The icon of the selected REX mask file is displayed inside the frame.

The REX mask file displayed
in the [Display] panel is pop-
up displayed.

The icon of the selected
REX mask file is displayed
inside the frame. And the
file name and the
observation mode are also
displayed above and under
the frame.

[REX mode] option
button

TIP

Summary of Contents for FLUOVIEW FV500























































































































































































































































































































































































































































































Reviews:

No comments