Oce VarioLink 6022 User Manual Download

Page: 257 / 540

VarioLink 6022/7522

6-10

Copy paper/originals

Touch [Auto Detect].

As the factory default, "Auto Detect" is selected.

Touch [OK], and then touch [OK] in the next screen that appears.

The Basic screen appears again.

6.2.2

Selecting a paper size setting (Size Setting)

The paper size can be set for the bypass tray so that it can be used with the specified paper size.

This is useful, for example, when the size of the paper that is loaded cannot be automatically detected (such
as with paper in metric sizes).

The following procedure describes how to specify the setting for A4

loaded into the bypass tray.

In the Basic screen, touch [Paper].

The Paper screen appears.

Summary of Contents for VarioLink 6022





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for VarioLink 6022

Reviews:

Related manuals for VarioLink 6022

Brands by name

Popular brands

Oce VarioLink 6022, User Manual

Search results

Summary of Contents for VarioLink 6022

Reviews:

Related manuals for VarioLink 6022

Brands by name

Popular brands