Oce VarioLink 6022 User Manual Download

Page: 342 / 540

VarioLink 6022/7522

7-65

Application functions

7.15.5

Printing the image scanned first overlapped by the remaining original pages
("Overlay" function)

Copies can be printed with the contents of the first scanned original page overlapped by the remaining
original pages.

In addition, a scanned original can be stored as a registered overlay and recalled and used later.

Position the original for the overlay.

Touch [Application], and then touch [Stamp/Composition].

The Stamp/Composition screen appears.

Touch [Overlay].

–

To cancel the "Overlay" function, touch [No].

The Overlay screen appears.

Select the desired settings for "Pages".

Summary of Contents for VarioLink 6022





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for VarioLink 6022

Reviews:

Related manuals for VarioLink 6022

Brands by name

Popular brands

Oce VarioLink 6022, User Manual

Search results

Summary of Contents for VarioLink 6022

Reviews:

Related manuals for VarioLink 6022

Brands by name

Popular brands