Oce VarioLink 6022 User Manual Download

Page: 169 / 540

VarioLink 6022/7522

3-11

Additional copy operations

3.5

Copying with programmed copy settings (Mode Memory)

Programmed copy settings can be recalled to be used again for copying.

Position the original to be copied.

–

For details on positioning the original, refer to

"Feeding the original" on page 2-6

Press the [Mode Memory] key.

The Recall Copy Program screen appears.

Touch the button for the copy program registered with the copy settings to be recalled.

–

If the copy settings in the selected copy program are not to be checked, continue with step 8.

–

If the copy program to be recalled is not displayed, touch [

↑

] and [

↓

] until the desired copy program

is displayed.

Press the [Check Program Settings] key.

–

The copy settings cannot be changed from the Check Job Settings screens.

Summary of Contents for VarioLink 6022





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for VarioLink 6022

Reviews:

Related manuals for VarioLink 6022

Brands by name

Popular brands

Oce VarioLink 6022, User Manual

Search results

Summary of Contents for VarioLink 6022

Reviews:

Related manuals for VarioLink 6022

Brands by name

Popular brands