Oce CS520, User Manual

Page: 436 / 472

[13] Memory Switch Setting
14-436
[13] Memory Switch Setting
This function allows you to change the Memory Settings listed below.
SW No. Item Setting (default is underlined)
No. 01: Auto reset timer OFF / 30 sec. / 60 sec. / 90 sec. / 120
sec./150 sec. / 180 sec. / 210 sec. /
240 sec. / 270 sec. / 300 sec.
No. 02: AUTO RESET key function Full-Auto / Initial Setting
No. 03: RADF-Original effect RADF+AUTO RESET key selected /
RADF selected
No. 04: Job memory auto recall (30) OFF / ON
No. 05: Finisher mode by Full-auto Face down (Sub tray) / Non-sort / Sort
/ Staple sort / Stitch&Fold / Fold / Face
up (Sub tray)
No. 06: Initial by Key counter insert OFF / ON
No. 07: Erasure outside area of orig. Erased for except Platen (1:1) / Area
outside of orig. erased / Erased for
APS/AMS only
No. 08: RADF frame erasure selection None / 1mm frame / 2mm frame / 3mm
frame / 4mm frame / 5mm frame
No. 09: Automatic tray switching OFF / ON
No. 10: Platen APS OFF / ON
No. 11: RADF APS OFF / ON
No. 12: Platen AMS OFF / ON
No. 13: RADF AMS OFF / ON
No. 14: Select tray when APS cancel APS preferential tray / Tray 1 / Tray 2 /
Tray 3 / Tray 4 / Bypass tray
No. 15: Platen original size detect Only A series / Full size / AB series /
Inch series
No. 16: RADF original size detect Only A series / Full size / AB series /
Inch series
No. 17: Platen orig. size detect (SMALL) A5R / B6R / 5.5”x8.5”R / B5 / A4 /
8.5x11 / A6R
No. 18: Rotation ON-APS/AMS only / ON-APS/AMS/
Reduce only / ON-Always
No. 19: Staple mode reset-function OFF / ON
No. 20: Job offset operating OFF / ON
No. 21: Continuation print Copier:OFF/Printer:OFF / Copier:ON/
Printer:ON / Copier:ON/Printer:OFF /
Copier:OFF/Printer:ON
No. 22: Key click sound OFF / ON
No. 23: 1 SHOT indication time 3 seconds / 5 seconds
No. 24: Power save screen Shut off mode / Low power mode
No. 25: START key latch function OFF / ON
No. 26: STOP key function JOB momentary stop / JOB cancel