Oce CS520, User Manual

Page: 409 / 472

14-409
[2] Copier Initial Setting
[2] Copier Initial Setting
Initial settings are the settings that display automatically when the copier is
powered on, when Auto Reset timer or Power Saver is operated, when the EKC
password is entered, when the key counter is set, or when [
AUTO RESET ] key is
pressed.
Initially, i.e., at installation, the Basic Screen displays the following condition to meet
Energy Star requirements:
Colour Mode: Full colour
Copy Mode: 1-1
Paper Size: APS
Lens Mode: 1:1
Output Mode: Offset sort
NOTE:
The most commonly-used settings are established at installation. Before
changing any of the copier settings, be sure that you understand the overall
and long-range effect of the change.
Procedure
1
Touch [2] Copier initial setting to display the Copier Initial Setting Screen.
2
Make a selection for each mode as initial settings.
Touch
RADF to select or deselect it.
NOTE:
The machine will restore the initial settings specified as above unless the
Memory switch No. 4 “Job memory (30) auto recall” is turned ON with the
Job memory No. 30 registered.
3 Touch OK to complete the setting and return to the Key Operator Mode Screen,
or touch CANCEL to restore the previous setting.
Key Operator Mode Screen
Copier Initial Setting Screen