Oce CS520, User Manual

Page: 135 / 472

4-135
Interrupt Copying
The timing to enter the Interrupt mode varies according to the job in progress
on the machine when [
INTERRUPT
] is pressed.
See the following page.
In Reserve mode, pressing [
INTERRUPT
] before the copier finishes
scanning the reserve job originals clears the settings selected for the reserve
job.
For details of Reserve mode, see p. 3-106.
2. Set copy conditions, as desired.
The initial settings in Interrupt mode are as follows.
Colour Mode :Full Colour
Copy Mode : 1 ) 1
RADF : ON
AE : ON
Lens Mode : 1.000 (100%)
APS : ON
Print Quantity : 1
Finisher : Sub Tray
Remove any document from the platen glass or from the document feeder, if
present.
3. Position original(s).
See p. 3-70 for details on positioning originals.
4. Press [
START
] to start the interrupt copying.
When [
CHECK
] is pressed during Interrupt copying, the information
displayed reflects the initial copy job settings. Check mode will not display
Interrupt copy job information.