Oce CS520, User Manual

Page: 105 / 472

3-105
To Scan Originals into Memory (Store Mode)
Using RADF:
Position originals with page one FACE UP. Up to 100 originals can be loaded.
If the number of originals exceeds 100, divide them into blocks not exceeding
100 sheets and load them beginning with the block with the first page.
Be sure to check the original direction according to the Original direction icon
displayed at the upper left corner of the Basic Screen.
The copy result may not be satisfactory if the originals are set in wrong
direction. Be sure that the originals are set in the same direction as indicated
by the Original direction icon, especially when making double-sided copies or
using Staple, Stitch & Fold, Fold, or Booklet mode. See p. 9-242 for details.
See p. 3-70 for details on positioning originals.
5. Press [ START ] to scan.
• Repeat steps
4
and
5
until all originals are scanned.
• Memory indicator on the upper right of the Basic Screen allows you to
check the remaining memory.
• To delete the scanned data without printing, press [
STOP
]. See p. 3-81 for
details.
See p. 5-157 if memory overflow occurs.
Should memory overflow occur frequently, it is recommended that you
contact your service representative to expand the memory capacity in your
machine.
6. Touch
STORE
to exit the Store mode.
STORE
will no longer be highlighted.
7. Press [
START
].
All the data in memory will be output.
Press [
STOP
] to suspend the scanning or printing job. See p. 3-81 for details.
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.