Oce CS520, User Manual

Page: 129 / 472

4-129
Making Sample Copy (Proof Copy)
If the copy result is satisfactory, proceed to step 5 .
If any setting changes are required, refer to p. 4-130 under the next heading.
4. Repeat proof copying until the copy result becomes satisfactory.
5. Change the print quantity, as required.
Proof copy can be performed as needed, until the print quantity amount on
the Basic Screen reaches zero.
If required, change the print quantity on the Basic Screen.
6. Press [ START ].
If the print quantity is not changed, the copier will output the rest, minus the
sample sets.
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.