Oce CS520, User Manual

Page: 354 / 472

Overlaying an Image onto Each Page Copied in the Job
11-354
3. Touch
OVERLAY
.
4. Touch
OK
on the Stamp/Overlay Selection Screen.
The Application Selection Screen will be restored.
5. Touch
OK
on the Application Selection Screen.
The Basic Screen will be restored.
The Store mode is automatically selected.
6. Select the desired paper size and magnification on the Basic
Screen.
APS and AMS are automatically released, and 1.000 (100%) is selected as a
magnification ratio.
7. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
8. Position the overlaying original.
Position the original FACE UP in the document feeder or FACE DOWN on the
platen glass.
For details on positioning originals, see p. 3-70.
9. Press [
START
] to scan.
The original image will be scanned into memory.
10. Position the original(s) to be overlaid.
Position the original FACE UP in the document feeder or FACE DOWN on the
platen glass.
11. Press [
START
] to scan.
12. Repeat steps
10
and
11
for all originals.
13. Touch
STORE
to exit the Store mode, then press [
START
] to print.