Oce CS2436, User Manual

Page: 530 / 870

Printer Parts (CS2436-8)
Adjust
Length
B:
Standard/
Draft
Change Settings
A:High
Displayed when you have selected
Feed Priority > Adj. Priority > Print
Length .
Adjustment relative to the amount of
stretching or shrinkage of the current
paper.
Enter either the adjustment results
from AdjustmentPrint or the
discrepancy that you measured (as a
percentage).
For paper that tends to stretch,
increase the feed amount by choosing
a higher adjustment value. For paper
that tends to shrink, decrease the
feed amount by choosing a lower
adjustment value.
B:
Standard/
Draft
Adj. Fine Feed
Displayed when you have selected
Feed Priority
>
Adj. Priority
> Automatic or Print Quality . Fine-
tune the feed amount manually during
printing. (See "Fine-Tuning the Paper
Feed Amount (Adj. Fine
Feed) ( 7.2.5 ).")
Maintenance
Head Cleaning
Clean the Printhead. (See "Cleaning
the Printhead ( 10.2.3 ).")
Choose
Head Cleaning A
if printing
is faint, oddly colored, or contains
foreign substances.
Choose Head Cleaning B if no ink is
printed at all, or if printing is not
improved by Head Cleaning A .
Nozzle Check
Print a test pattern to check the
nozzles.
Replace P.head
When replacing the Printhead, choose
Yes and follow the instructions on the
screen. (See "Replacing the
Printhead ( 10.2.4 ).")
Not displayed during a warning
message that the remaining
Maintenance Cartridge capacity is low.
Repl. maint cart
When replacing the Maintenance
Cartridge, choose
Yes
and follow the
instructions on the screen. (See
"Replacing the Maintenance
Cartridge ( 10.3.2 ).")
Head Info
Indicates information about the
printhead.
GL2 Replot Print the previous GL2 print job again.
GL2 BufferClear
Clear the print data in the replot
buffer.
Monochrome Print in monochrome.
Color (CAD) 1 Print in standard colors.
Color (CAD) 2 Print in brighter colors.
1] file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp05.html (37 of 57) [4-3-2010 11:36:5