Oce CS120, Copying Manual

Page: 51 / 381

Overview of the Copying Procedure 1-36
.
Optimizing the Copy Speed
To optimize the copy speed when making only one copy at the 100% copy ratio, be
sure that the following conditions are met:
•
The feeder (option) is used and the original is placed into the original tray.
•
Copying is made onto LTR-size paper. (The paper should be placed in the vertical
position. This applies even when the setting is made through Auto Paper
Selection.)
•
Paper that is vertically longer than the original is used.
• The ACS (Automatic Color Selection) function is turned off.
• Automatic Exposure is turned off.
•
Plain paper is used when feeding paper from the stack bypass. (Select [Plain
Paper] in the copy settings configuration screen for the stack bypass.)
• The Two-sided, Transparency Interleaving, Cover, and Offset Plate Original
functions are not specified.
NOTE
.
•
The following additional conditions must be met when the IP-ED board (option) is
attached:
- The Center Shift function is turned off.
- The Auto Zoom and Entire Image functions are not specified.
- The following functions are not specified:
Zoom Program, XY Zoom, Multi-page Enlargement, Image Combination, Shift, Margin,
Two-page Separation, Frame Erase, Color Creation (except Single Color), Image
Creation (except Nega/Posi), Area Designation, and Marker Editing
Basic Cop
ying
1