Oce CS120, Copying Manual

Page: 49 / 381

Overview of the Copying Procedure 1-34
5
Press the keys on the control panel to specify settings for the
various functions, as necessary.
Perform the following procedures for setting the ACS function, the Full Color
mode, the Black Monochrome mode, the Original Recognition function, and the
Center Shift function.
See “Switching Between the Full Color Mode and Black Monochrome Mode
(ACS),” on p. 1-112.
See “Specifying Automatic Recognition of the Size of the Original (Original
Recognition),” on p. 1-115
See “Centering the Copied Image (Center Shift),” on p. 1-117.
6
Enter the copy quantity.
NOTE
.
•
For instructions on setting the number of copies, see “Entering the Copy Quantity,”
on p. 1-44.
7
Press (Start).
Copying starts.
When a Copy job is complete, remove the original.
IMPORTANT
.
•
You cannot change copy settings such as the copy quantity, paper size, and copy
ratio while copying is in progress.
1 2 3
4 5 6
7 8 9
ACS Full Color Black
Original
Recognition
Center Shift
Reset
Guide
Additional Functions
Interrupt
Clear
Basic Cop
ying
1