Oce CS120, Copying Manual

Page: 173 / 381

Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-38
IMPORTANT
.
•
This function is available only when the IP-ED board (option) is attached.
.
1
Place the originals; then press [Sp. Feature]
➔
[Frame Erase].
2
Press [Book Frame Erase]
➔
[Next].
3
Specify the size of the bound original when it is opened; then
press [Next].
IMPORTANT
.
•
If the Original Recognition function is turned on and the detected size is different
from the specified size, Frame Erase will be executed according to the original’s
detected size.
NOTE
.
•
To select using the A series or B series original size standard, press [A/B-Size].
4
Specify the desired frame erase width using [-] or [+].
If the width of the frame has been set in another Frame Erase mode, that setting
is still valid. If necessary, change the width setting to the desired value.
Useful Cop
y Functions
2