Oce CS120, Copying Manual

Page: 223 / 381

Changing the Color of the Original (Color Creation) 3-36
The following three types of adjustments can be made, depending on the
gradation pattern.
- [Frame]: Enables you to apply gradations to borders to use them as
frames. (See “Specifying the Width of the Gradation
Frame,” on p. 3-37.)
- [Repeat]: Adjusts the pitch at which gradations repeat. (See
“Specifying the Pitch at Which Gradations Repeat,” on p.
3-39.)
- [Gradation Adjust.]: Enables you to make fine adjustments to the smoothness
of gradations. (See “Making Fine Adjustments to the
Smoothness of Gradations,” on p. 3-41.)
4
Press [Beginning Color], then select the color the gradation
should begin with in the screen that appears.
There are four ways to select color:
- Color Palette Selection (see p. 3-63)
- Designated Color Selection (see p.3-68)
- Registered Color Selection (see p. 3-70)
- Color Circle Selection (see p. 3-72)
IMPORTANT
.
•
Color Palette Selection and Designated Color Selection are available only if the
editor (option) is attached.
Adjusting Color and Image Quality
3