4.1.2. Installation Location and Position
The Battery Control Panel is rated to operate in the temperature range of 10 °C to 40 °C. It designed
to be vertically wall-mounted in an indoor location.
It is recommended to install the Battery Control Panel with the display at eye level to allow operating
conditions to be read at all times.
4.1.2.1. Mounting Clearances
It is recommended to leave 300 mm [12 in] of clearance on all sides (above, below, left, and right) of
the mounted Battery Control Panel unit. This facilitates airflow through the Battery Control Panel for
better thermal performance as well as for easy access to connectors for installation.
4.1.3. Mounting Instructions
Procure Fasteners
Ensure appropriate fasteners (not included) for are used to mount the Battery Control Panel.
These fasteners will vary depending on the material and construction of the mounting surface.
It is recommended to use M6 mounting bolts with a washer for the 4 mounting holes on the top
and bottom flanges of the unit.
If used to tap into a wall or anchors, the mounting bolts should be at least 25 mm [1 in] long. If
required, install anchors in the wall to mate with the mounting bolts.
Mount unit
Ensure the intended mounting surface is sturdy enough to secure the unit to it. Ensure the path
for the fasteners in the intended mounting surface is safe and free of electrical or other cables.
It is recommended that the installation be performed by two people—one person to hold the unit
in place, while another person fastens the unit.
Nuvation Energy Battery Control Panel - Product Manual
Document ID: NE-PM-005
12
Rev 1.1, 2020-10-14
Curie Update 2
