6.5. The Menu Options
The menu to the right of the Operator Interface provides access to tools and advanced options. Some
of these options may be locked to prevent accidental changes.
The menu will not be visible, and this section and following sub-sections will not be
accessible when the Operator Interface is loaded on the Battery Control Panel
display.
6.5.1. Registers
This screen allows you to change registers and customize your Nuvation Energy BMS to your needs.
6.5.2. Service
This screen allows you to import and export configuration file.
6.5.2.1. Importing a Configuration File
This menu option allows you to import a configuration file.
If you have a configuration file ready to import, refer to
for instructions.
6.5.2.2. Exporting a Configuration File
Nuvation Energy BMS doesn’t preserve the originally imported configuration file with
comments and formatting. The export feature will export a configuration file with an
alphabetical listing of all registers and their set values.
To export your configuration file:
1. From the menu, select
Service
2. Click
Export Configuration
6.5.3. Connection
The connection screen allows you to change the IP address and timeout of the Nuvation Energy BMS
that you are trying to access.
If the Operator Interface loads properly, but fails to establish a connection, try
increasing the timeout value.
This connection screen should not be used for changing the IP address. You may use
this screen to change the timout.
Nuvation Energy Battery Control Panel - Product Manual
Document ID: NE-PM-005
49
Rev 1.1, 2020-10-14
Curie Update 2
