7. Using the Platform Interface
7.1. Overview
The Platform Interface accessible by navigating to
http://ncontroller-<serial_number>.local/platform
and enables configuration and management of the Nuvation Energy Battery Control Panel. This URL
can be accessed via a
. Replace
<serial number>
with the Battery Control Panel
serial number - this can be found on a label on the exterior of the product.
There are three main pages that can be navigated to by using the menu on the left side of the page:
▪
Functions
▪
Networks
▪
Settings
7.2. Functions
The Functions page is responsible for installing, uninstalling, and upgrading 'Functions' and 'Bundles'.
Functions
Functions are self-contained software that serve a specific function on the Battery Control Panel.
Functions may operate independently, or may depend on other Functions to work. Functions with
dependencies are defined in a bundle.
Bundles
Bundle are a collection of dependent 'Functions' to serve a broader purpose on the Battery Control
Panel . There are two types of Bundles that may be installed based on the Battery Control Panel
unit’s hardware configuration; either the
msc_bundle
or the
bcp_bundle
may be installed.
Do not, under any circumstance, install both the
bcp_bundle
and the
msc_bundle
on the
same Battery Control Panel. This will render the Battery Control Panel inoperable.
Figure 20. Nuvation Energy Platform Interface Function
Nuvation Energy Battery Control Panel - Product Manual
Document ID: NE-PM-005
56
Rev 1.1, 2020-10-14
Curie Update 2
