Provides Remote Access
Remote access for data analytics or for viewing and adjusting battery operation remotely via web
browser on a PC, tablet computer or even on a smartphone.
Automates System-Wide Fault Response
Manually or automatically identify and act upon faults anywhere in the battery pack.
Communications
Communicate securely over Ethernet. Provides unified interface for site controllers to multiple
stacks.
Automatic Pack Connection
Allows the BMS to manage the connected state of all battery stacks within the pack. When
requested, the Battery Control Panel will connect all stacks if they do not violate the pack
connection voltage limit. Stacks are automatically connected when the limit is no longer violated
(i.e. when the stack voltage becomes close enough to the pack voltage that is safe to connect).
Maximize Pack Uptime and Connection
Provides a flexible configuration to manage battery stack faults at a pack level. An operator can
configure a battery pack to tolerate a specified number of stacks that fault and disconnect from
the DC bus. The Battery Control Panel allows the pack to remain operational and manage the
reduced power capacity of the battery.
3.2.2. Unified View Operator Interface
Browser user interface, which supports Chrome and Firefox, provides a view of:
Statistics View
Monitor pack-level statistics for voltage, temperature, and current across all cells.
Real-Time View
Monitor measurement and control information in real-time.
Aggregate State-of-Charge
View State-of-Charge calculated values for the entire battery.
Flow-Through I/O
Control all points in the BMS from a single interface.
Communications Status
Reports networking communication status and communication issues from stacks within the pack.
Faults and Warnings
Monitor all system-wide faults and warnings or—for a finer level of control—drill down into detailed
battery pack diagnostics.
Nuvation Energy Battery Control Panel - Product Manual
Document ID: NE-PM-005
7
Rev 1.1, 2020-10-14
Curie Update 2
