409
Appendix/Exter
nal De
vices/T
roub
leshooting
●
When you update the pattern definitions, your FOMA terminal-specific information (such as model and
manufacturer’s serial number) is automatically sent to the server (server for the scanning function under
DoCoMo’s supervision). DoCoMo will not use the information sent from your mobile phone for any purposes
other than the scanning function.
●
You cannot update the pattern definitions in the following cases:
- When the date/time is not set
- When “
” is displayed
- During a call
- While the Self mode is set
- While the Lock all is set
- While the Omakase Lock is set
- When the UIM is not inserted
- When another function is being used
- When the FOMA terminal is connected to an external device such as a PC
- When the international roaming service is used
●
If you cancel the downloading operation before it is completed, the data downloaded until this point is
deleted.
Setting Whether Pattern Definitions Are Automatically Updated
You can set whether to update the pattern definitions automatically.
1
From the Menu, select [Settings]
→
[Management]
→
[Scan function]
→
[Set auto-
update] and press
.
Ｓｅｔ ａｕｔｏ−ｕｐｄａｔｅ
ｏｆ ｐａｔｔｅｒｎ
ｄｅｆｉｎｉｔｉｏｎｓ
Ｖａｌｉｄ
Ｉｎｖａｌｉｄ
[Valid] :
Update the pattern definitions automatically.
[Invalid] :
Do not update the pattern definitions automatically.
2
Select [Valid]
→
[Yes]
→
[Yes] and press
.
The Set auto-update is set.
●
If the Set auto-update is set to [Valid], “
” (Update completed) appears in the stand-by display when the
pattern definitions auto-update is completed. If the pattern definitions were not auto-updated successfully,
“
” (Update definitions) appears. Confirm the information by selecting the icon to clear the notification.
●
If you leave the FOMA terminal without a battery pack or with a fully expended battery pack for a long
period of time, the date and time is reset, and the Auto-update may not operate correctly.
Continued
