240
One Seg
About One Seg
What is One Seg?
One Seg is a digital terrestrial broadcasting for mobile
devices and provides data broadcasting as well as
video and sound broadcasting. You can also receive
more detailed program information, join panel shows,
enjoy TV shopping, and more using i-mode.
For details on the “One Seg” service, see the website below.
The Association for Promotion of Digital Broadcasting
PC :
http://www.dpa.or.jp/
i-mode : http://www.dpa.or.jp/1seg/k/
About Using One Seg
One Seg is a service provided by TV broadcasters (broadcast
stations).
You can receive video, sound, and data broadcasting of One
Seg that is broadcasted without any subscription and free of
charge.
The two types of information are available in the area of
the data broadcasting: “data broadcasting” and “data
broadcasting site”. “Data broadcasting” is carried in airwave
with video and sound, and “data broadcasting site” is
available by accessing sites provided by TV broadcasters
(broadcast stations). Also, “i-mode site” can be accessed
with this service. To access sites, you need to subscribe to
services such as i-mode.
The packet communication charge is required to access a
site such as “data broadcasting site” or “i-mode site”.
Depending on a site, an additional information charge may be
required for using sites (i-mode paid sites).
About Radio Wave
One Seg is one of the broadcasting services and uses
the different radio wave (airwave) from the FOMA
service. Therefore, regardless of whether you are
outside/inside of the FOMA service area, you cannot
receive One Seg broadcasting in a place where the
airwave does not reach or in a time zone when it is out
of service.
Even if you are in the digital terrestrial broadcasting
service area, the receiving condition may become
worse or you cannot receive anything in the following
places.
-
Places where are far away from the radio wave tower which
send airwaves
-
Places such as interfered by mountains, covered with a
building where the radio wave is interrupted by features or
buildings
-
Places such as in the tunnel, basement, or building where the
radio wave is weak or does not reach at all
To make the radio wave condition better, extend the
One Seg Antenna fully. Changing the orientation of the
antenna, placing the FOMA terminal closer or further to
the body, or moving to another location may make the
radio wave condition better.
Display When Using One Seg for the First Time
After the purchase, when you use One Seg for the
first time, the display for confirming the notabilia of
the service appears. Check the contents and press
(OK).
●
When you insert another UIM or perform the Reset all
data&set, the display for confirming the notabilia of the
service appears again.
What is Broadcast Storage Area?
The broadcast storage area is a storage area inside the
terminal that is exclusive for One Seg. The information
you input according to the instructions provided by the
data broadcast program you are watching is saved
in the broadcast storage area as specified by the
settings of TV broadcasters (broadcast stations). The
information to be saved may contain answers for quiz,
as well as personal information such as membership
number, gender, age, or occupation.
The saved information may be displayed, or be sent to
TV broadcasters (broadcast stations) without another
input of information when you browse to the data
broadcasting site.
To delete information in the broadcast storage area,
see P.255.
When you replace the UIM with another one, the screen
for confirming whether to reset the broadcast storage
area appears. Select [Yes] to reset it.
■
Using information in the broadcast storage area
When information in the broadcast storage area is
used while you are watching a program, the message
“Use saved info? It may include info used by the same
broadcasting gr.” appears. When you select [Yes], the
confirmation screen does not appear as long as you
watch the same program. If you select [Yes,from then
on], the confirmation screen no longer appears even if
the program is changed.
Other Features
●
One-touch channel selection by the remote-control
numbers (P.244)
●
Switching between the main sound and sub sound
(P.246)
●
Using the program guide i-
α
ppli (P.247)
●
Setting a timer for watching (P.247)
●
Setting a timer for recording (P.247)
●
Displaying and using the data broadcasting (P.251)
●
Using TVlink (P.252)
●
Recording a video and still image (P.252)
●
Time shift play while watching (P.253)
●
Rapid play with sound at about 1.3x speed (P.277)
