285
Data Displa
y/Edit/Management
Using the FOMA Terminal with
a PC
<USB mode setting>
When you connect the FOMA terminal to a PC using
the FOMA USB Cable with Charge Function 01
(optional), you can use it as an external drive to read/
write data on the microSD memory card.
You can change the USB mode setting before connecting the
FOMA terminal to a PC.
If the FOMA terminal is not connected to a PC correctly or the
battery level is very low or 0, not only data cannot be sent/
received, but also it may be lost in some cases.
Do not unplug the FOMA USB Cable with Charge Function 01
(optional) during reading/writing data. If you do so, not only
data cannot be sent/received, but also it may be lost in some
cases.
The operating environment for using the FOMA terminal
connected to a PC is as follows.
Item
Required environment
C o n n e c t i o n
cable
FOMA USB Cable with Charge Function 01
(optional)
PC main unit
PC with a USB port (Universal Serial Bus
Specification 1.1 compliant) that can be used
to connect the FOMA USB Cable with Charge
Function 01 (optional)
OS
Windows 2000 Professional (SP3 or later),
Windows XP,
Windows Vista (Japanese version)
1
From the Menu, select [Settings]
→
[Management]
→
[USB mode setting] and press
.
ＵＳＢ ｍｏｄｅ ｓｅｔｔｉｎｇ
Ｃｏｍｍｕｎｉｃａｔｉｏｎ ｍｏｄｅ
ｍｉｃｒｏＳＤ ｍｏｄｅ
ＭＴＰ ｍｏｄｅ
ＡＴＲＡＣ ｍｏｄｅ
Ｕｓｅｓ ＵＳＢ Ｈａｎｄｓ−ｆｒｅｅ／
ｄａｔａ ｔｒａｎｓｍｉｓｓｉｏｎ／
ｄａｔａ ｔｒａｎｓｆｅｒ
[Communication mode]:
Perform packet and 64K data communication, and
send/receive data.
[microSD mode]:
Read and write data from/to the microSD memory card.
[MTP mode]:
Transfer music data (WMA file) from a PC to the microSD
memory card.
[ATRAC mode]:
Transfer music data (ATRAC file) from a PC to the
microSD memory card using the SonicStage.
2
Select [microSD mode] and press
.
The microSD mode is set and “ ” changes to “ ”.
On the PC, “
リムーバブル ディスク
” is displayed for the
microSD memory card.
You can check the current USB mode and connection
status by the following icons.
Icon
Mode/Connection status
Communication mode
microSD mode
MTP mode (Connected)
MTP mode (Transferring)
MTP mode (Completed)
MTP mode (Error)
※
ATRAC mode
※
It appears when the MTP connection cannot be
started because there is not enough memory. End the
unused applications, increase memory space, and
then perform the PC connection again.
3
Connect the FOMA terminal and PC using the
FOMA USB Cable with Charge Function 01
(optional).
3
1
2
USB connector
External
connection
terminal
Inser t the con-
nector horizontal-
ly with the label
side facing up.
External connection
connector
FOMA USB Cable with Charge
Function 01 (optional)
USB terminal
The icon “
” (USB cable cncted)
appears in the stand-by display.
When you press
(Link) and
then select “
”, the USB mode
setting display appears.
●
Do not format the microSD memory card using a PC, etc.
Make sure to format it on the FOMA terminal.
●
Even if you set the USB mode setting to [MTP mode],
[microSD mode], or [ATRAC mode] and connect the
FOMA terminal to a PC, the PC may not recognize the
FOMA terminal while the FOMA terminal is accessing to
the microSD memory card (reading/saving data, etc.) or
the microSD memory card is not inserted.
●
While the USB mode setting is set to [ATRAC mode], when
the FOMA terminal is connected to a PC, the message “SD
カード枚数を超えたため認識できません 以前使用して
いた
SD
カードを使用してください
” (The number of SD
cards exceeds the limit and cannot be recognized. Use
the SD card which has been used before.) appears. In
this case, use the microSD memory card which has been
inserted in the FOMA terminal before as no more microSD
memory cards can be recognized.
●
While the USB mode setting is set to [MTP mode] and the
FOMA terminal is connected to a PC, when you press
,
the Standard menu appears. The Kisekae menu is not
displayed. Also, some functions may be limited.
●
For more details about the USB mode setting, see the
website below.
http://www.SonyEricsson.co.jp/so905i/faq.html
Continued
