NV-DVR3009 / NV-DVR3016 ver. 1.1 - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
85
Before starting controlling multiplexer by means of IR remote control make sure it is not blocked in the
multiplexer’s menu (see chapter 3.7.6)
To select a multiplexer that will controlled point the remote control at the IR receiver that can be found
on the multiplexer’s front panel, press the numeric button corresponding to a given multiplexer’s ID
and old it for about 3 seconds.
Remote control button functions correspond to the multiplexer’s front panel button functions.
Below you have difference between multiplexer’s front panel button functions and the button functions
of IR remote control.
If you want to go to the playback menu press
PLAY
Playback directions, pause mode
Horizontal arrows act as
JOG
dial
Vertical arrows act as
SHUTTLE
ring
If you wan to go to the PTZ menu press
Please remember one thing as far as the NV-DVR3016 is concerned. If you want to select a channel
from 1 to 9, the required number has to be preceded by the digit 0, i.e. to select channel No5 press 0
and next 5.
Password digits during logging in should be input in the same way.
MULTIPLEXER’S OPERATION FROM THE LEVEL OF IR REMOTE
