Novus NV-DVR3009 User Manual Download Page 68

Page: 68 / 94

NV-DVR3009 / NV-DVR3016 ver. 1.1 - User’s manual

PLAYBACK

5.3 Recording Event List

In case the multiplexers has been operating in the alarm recording mode it is possible to view alarm
recordings. To do that select

Recording Event List

Alarm recordings list is displayed on the screen.

Particular lines correspond to recordings connected with given events. On the list above there are 688
events. To see the invisible ones use the

JOG

dial.

If there are no alarm recordings the following information is displayed.

After selecting the required file by means of the

JOG

dial press

ENTER

to start playback.

During Event List Playback the same functions and modes are available as with HDD playback.

Notice: As it described in chapter 3.7.1, it is possible to display full Event Log which also contains

recording Event List. Apart from the alarm recordings you can also find other things such as

password change, power loss. After selecting position and pressing

ENTER

playback from the

given time period starts.

Summary of Contents for NV-DVR3009






























































































Search results

Summary of Contents for NV-DVR3009

Reviews:

Related manuals for NV-DVR3009

Brands by name

Popular brands

Novus NV-DVR3009, User Manual

Search results

Summary of Contents for NV-DVR3009

Reviews:

Related manuals for NV-DVR3009

Brands by name

Popular brands