Nortel Passport 8600 Series, Commissioning

Page: 77 / 136

Connecting a modem 77
restart Shuts down and initializes the port.
slip-compression Enables or disables Transmission Control
Protocol over IP (TCP/IP) header compression
for SLIP mode. The default is false. Use the
no
operator to remove this configuration. To
configure this option to the default value, use the
default
operator with the command.
slip-rx-compression
Enables or disables TCP/IP header compression
on the receive packet for SLIP mode. The default
is false. Use the
no
operator to remove this
configuration. To configure this option to the
default value, use the
default
operator with the
command.
Procedure job aid: PPP file
Create the PPP file with one option on each line; comment lines start with
a pound sign (#). The following table lists the recognized options.
Table 11
Job aid: PPP file options
Option Description
asyncmap <value>
Configures the desired async map to
the value you specify.
chap_file <file>
Obtains Challenge-Handshake
Authentication Protocol (CHAP)
secrets from the specified file. You
require this option if either peer
requires CHAP authentication. If your
users must use the same IP address,
the PAP and CHAP secret files must
specify the same IP address for all
users and it must match the peer-ip
setting on the modem port.
chap_interval <value>
Configures the interval, in seconds, for
the CHAP rechallenge to the value you
specify.
chap_restart <value>
Configures the timeout, in seconds,
for CHAP negotiation to the value you
specify.
debug Activates the PPP daemon debug
mode.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.