Nortel 400 Using Manual Download Page 305

Page: 305 / 344

Appendix A Troubleshooting and error messages

305

Using the BayStack Instant Internet Management Software Version 7.11

Viewing a unit’s update history

Each Instant Internet unit keeps a record of the versions that have been installed
and upgraded. This is the update history log.

To view an update history log for a unit:

Choose View > Update History.

Review the file as needed.

To print the file, choose File > Print.

To close the file, choose File > Close.

Viewing a unit’s advanced TCP/IP settings

To view the advanced TCP/IP settings for a unit:

Choose Support > Advanced TCP/IP Settings.

Review the file as needed.

To print the file, choose File > Print.

To close the file, choose File > Close.

Viewing a unit’s port mappings

To view a list of the port mappings for a unit:

Choose Support > Port Mappings.

A window opens that contains a Port Mappings List. Do not edit this list
unless you have previous port mappings experience.

Review the file as needed.

To print the file, choose File > Print.

To close the file, choose File > Close.

Summary of Contents for 400

























































































































































































































































































































































Search results

Summary of Contents for 400

Reviews:

Related manuals for 400

Brands by name

Popular brands

Nortel 400, Using Manual

Search results

Summary of Contents for 400

Reviews:

Related manuals for 400

Brands by name

Popular brands