Nortel 400, Using Manual

Page: 86 / 344

86 Chapter 2 User access administration
300868-G
2 Use the information in Table 9 to choose the report options you want.
3
Click OK.
4 Enter the drive and directory where you want the reports to be saved.
Common user and group access examples
The following examples represent the most common ways of creating users and
groups in Admin. This section gives general instructions on:
• Setting unlimited access (next)
• Restricting access to a few sites ( page 88 )
• Allowing access to a few sites ( page 88 )
Allowing unlimited access for everyone
To allow unlimited access for everyone in a group:
1
Set the Everyone Group’s access to Full access.
Refer to “Configuring Internet access” on page 58 for more information. The
Change User Access dialog box opens (Figure 44) .
Table 9 Report options
Item Description
Selected If you choose this option, you can choose the reports you want.
All When you choose this option, the Users area becomes active.
Users • Configured Access – Reports on the access defined for each user.
• Effective Access – Reports on the effective access for each user.
Groups Configured Access – Reports on the access defined for each group.