Nortel 400 Using Manual Download Page 52

Page: 52 / 344

Chapter 2 User access administration

300868-G

On the toolbar, click Paste.

A confirmation message box opens

(Figure 10)

Figure 10 Copy user confirmation message box

Click Yes to copy the user.

To copy the Internet access settings of one group to another group:

On the toolbar, click Groups.

Select the group that has the access settings you want to copy.

Do one of the following:

•

On the toolbar, click Copy.

•

Choose Groups > Copy a Group.

Select the destination group.

On the toolbar, click Paste.

A confirmation message box opens

(Figure 11)

Figure 11 Copy group confirmation message box

Click Yes to copy the group.

Summary of Contents for 400

























































































































































































































































































































































Search results

Summary of Contents for 400

Reviews:

Brands by name

Popular brands

Nortel 400, Using Manual

Search results

Summary of Contents for 400

Reviews:

Brands by name

Popular brands