manualshive.com logo in svg

Nortel 400, Using Manual

Share
Download
Nortel 400 Using Manual Download Page 262

262

Chapter 9 IPX configuration and support

300868-G

 

Resolving Winsock conflicts

When you install the IPX version of the Instant Internet workstation software, 
some of the Winsocks on the workstation are replaced with the Instant Internet 
version. These Winsocks enable Instant Internet to use the IPX protocol for 
Internet access.

During installation, you have the opportunity to rename any existing Winsocks. 
The Instant Internet IPX workstation software supports most Winsock 1.1- or 
Winsock 2.0-compliant applications.

There are three ways to reconcile Winsock compatibility issues. You can:

•

Migrate the workstation operating system to the Winsock 2.0 standard.

•

Use multiple versions of Winsock, which is discussed in the following 
sections. To use this effectively, it is important to understand how Winsocks 
work and some limitations of using multiple Winsocks.

•

Install TCP/IP on the workstations that are having Winsock conflicts (refer to 
“Installing TCP/IP on a Workstation” of Installing the BayStack Instant 
Internet Management Software Version 7.11) and configure them to use the 
Instant Internet unit as an IP-to-IP gateway. As an IPX client, the client 
applications share the Instant Internet TCP/IP stack, whereas when a 
workstation has its own TCP/IP stack, all applications use the standard TCP/
IP protocol and Microsoft Winsocks for access and most compatibility 
concerns can be avoided.

16-bit Winsocks

All 16-bit Winsock applications use the winsock.dll file. When you start a 16-bit 
application, it searches for the .dll file in the following order:

•

Memory

•

Its own application directory

•

windows\system directory

•

Search path

•

All mapped drives

If another application has already loaded a winsock.dll file, the new application 
uses the loaded version; otherwise, it looks in its application directory.

Summary of Contents for 400

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands