manualshive.com logo in svg

Nortel 400, Using Manual

Share
Download
Nortel 400 Using Manual Download Page 308

308

Appendix A Troubleshooting and error messages

300868-G

 

Viewing the system settings file

To view the system settings file:

The System Settings page opens.

Viewing a unit’s port mappings

To view the unit’s port mappings:

The Port Mappings page opens.

Viewing the hosts file

To view the hosts file:

The Hosts page opens.

IP workstation error messages

This information assists you in interpreting and troubleshooting error messages 
workstations see when running third-party applications that access the Internet.

IP workstations must be running iiLogin in order for these error messages to be 
shown. In addition, the administrator must decide whether or not the workstations 
should be shown these error messages. Refer to 

“Specifying the message a user 

sees upon an error” on page 85

.

On the System Administration page, click Config.

On the System Administration page, click Port Mappings.

On the System Administration page, click Hosts.

Summary of Contents for 400

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands