Nortel 400 Using Manual Download Page 74

Page: 74 / 344

Chapter 2 User access administration

300868-G

Figure 28 Change News Groups dialog box

Select the news group to which the group (or user) is to be denied access.

Click Delete.

A confirmation message box opens

(Figure 29)

Figure 29 Delete news group confirmation message box

Click Yes to confirm the deletion.

The news group is deleted from the group’s (or user’s) access list, and the user
no longer has access to that news group.

Changing news group access

To change group or user access to current news groups:

In the Admin window, select a group folder or user icon.

Summary of Contents for 400

























































































































































































































































































































































Search results

Summary of Contents for 400

Reviews:

Related manuals for 400

Brands by name

Popular brands

Nortel 400, Using Manual

Search results

Summary of Contents for 400

Reviews:

Related manuals for 400

Brands by name

Popular brands